Water Heater Unexpected Failure: Taking the Correct Measures
Water Heater Unexpected Failure: Taking the Correct Measures
Blog Article
Just about every person has their own individual opinion when it comes to What Would Cause My Electric Water Heater to Stop Working?.
Several contemporary houses utilize an electric water heater for their furnace, as a result of its comfort as well as ease of use. Nevertheless, similar to any other electric home appliances, troubles might occur with its use, suddenly. It can be really frustrating to wake up to a chilly shower as opposed to a warm one or having your bath with water that isn't warm adequate and even too hot. Whatever the case might be, hot water heater issues can be fairly nerve-racking. The good news is, we have actually made a list of feasible options to your water heater problems. There are a number of elements that could cause many of these troubles, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the major power supply for security. Whatever the problem is, getting it dealt with must not pose way too much of a problem if you adhere to these actions:
Check Your Power Supply:
As fundamental as this might seem, it is really required. Without adequate power, your water heater will certainly not work. So the first thing to do when your water suddenly stops working is to confirm that it isn't a power trouble. Check if the fuse is burnt out or the circuit breaker tripped. If the breaker is the problem, simply transform it off and on again. Replace any damaged or damaged fuse. Evaluate the device with power after these changes to see if it's currently functioning.
Check the Heating Element in the Water Heater:
If it's not a power trouble, then try checking out your heating element if it is still functioning. Examine each of your heating elements to make sure the problem isn't with any one of them. If any one of them is defective, change that component and then inspect whether the warm water is back on.
Examine Your Thermostat:
If your water heater still isn't working or the water coming out isn't warm enough, you may need to check the temperature settings on your upper thermostat. Ensure the circuit breaker is turned off before doing anything. Open the access panel as well as press the red button for temperature reset above the thermostat. This should assist heat up the water. Turn the breaker back on and inspect if the problem has actually been resolved.
Call A Professional:
If after changing all faulty parts as well as resetting your temperature, the hot water heater still isn't functioning, you might need to get in touch with an expert plumber for a specialist opinion. The trouble with your heating unit could be that the hot and cold taps have been switched over or it might be undersized for the amount of warm water needed in your home. Whatever the situation might be, a professional plumber would help resolve the trouble.
Verdict
Water heater issues are not always major. Most of them result from minor concerns like a blown fuse or worn-out heating element. Replacing the faulty parts ought to do the trick. Nevertheless, if you are still not able to fix the issue, give a call to your nearby plumber to find to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a devoted person who reads about How to Troubleshoot and Repair an Electric Water Heater, I was thinking sharing that segment was sensible. Do you know about somebody else who is looking into the subject? Be sure share it. I appreciate reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Rely on our emergency expertise. Report this page